Accessing the Wizard 37
LAN Settings Figure 21 LAN Settings Screen
LAN Configuration
This section of the screen displays a suggested LAN IP Address and
Subnet Mask for the Router. It also allows you to change the IP address
and subnet mask.
DHCP Server Parameters
The Router contains a Dynamic Host Configuration (DHCP) server that
can automatically configure the TCP/IP settings of every computer on
your network. To set up the DHCP Server, do the following:
1 Activate the DHCP Server by clicking the On radio button.
2 Specify an IP Pool range in the IP Pool Start Address and IP Pool End
Address text boxes. The largest available continuous IP pool will be
automatically entered. If this is not appropriate, make the required
changes.
3 Specify the DHCP Lease time by selecting the required value from the
Lease Time drop down list. The lease time is the length of time the DHCP
server will reserve the IP address for each computer.
4 If required, enter a Local Domain Name.
5 If you use 3Com NBX telephones, enter the IP address of the NBX call
processor at 3Com NBX Call Processor.
6 Click Next to display the Configuration Summary screen.