Filter
Top Products
Internet Settings 45
PPPoE
To configure the PPPoE connection for your Router:
1 Select PPPoE and then click Next. The PPPoE Interface screen displays (see
Figure 26
).
Figure 26 Internet Settings - PPPoE Interface Screen
2 Enter your PPP over Ethernet user name in the User Name text box.
3 Enter your PPP over Ethernet password in the Password text box and
enter it again in the Retype Password text box.
4 If required, enter your PPP over Ethernet service name in the Service
Name text box. This is optional. Not all ISPs require a PPPoE service name.
Do not enter anything in this box if your ISP does not require a service
name.
5 Enter the MTU value supplied by your ISP in the MTU text box. If your ISP
has not supplied an MTU value, leave this at the default value. The
default is 1454.
6 Type in an Idle Timeout. This is the amount of time you want the PPPoE
Server to remain inactive before the session is ended.
7 If you want to automatically reconnect to the server after timeout, check
the Auto Reconnect After Timeout check box.
8 Check all of your settings, and then click Apply.