Filter
Top Products
Accessing the Wizard 33
Figure 17 L2TP Screen
To setup the Router for use with an L2TP connection, do the following:
1 Enter your L2TP server address in the L2TP Server text box.
2 Enter your L2TP user name in the User ID text box.
3 Enter your L2TP password in the Password text box, and enter it again in
the Retype Password text box.
4 Type in an Idle Timeout. This is the amount of time you want the L2TP
Server to remain inactive before the session is ended.
5 Either:
■ Check the Get IP by DHCP check box if you want to obtain the IP
information from a DHCP Server on the network, or
■ If your ISP has provided you with IP address information, enter the IP
Address, Subnet Mask and Default Gateway in the text boxes
provided.
6 Check all of your settings, and then click Next. The DNS screen displays.
Refer to “DNS”
on page page 35.