Filter
Top Products
Software Maintenance Overview 41
Entering Ethernet port sub-menu
Enter <4> in Boot main menu to turn to Ethernet port sub-menu. The following
information is displayed:
=======================<NETWORK SUB-MENU>======================
| <1> Download Program To SDRAM And Run|
| <2> Download Main Boot File To Flash|
| <3> Download Backup Boot File To Flash|
| <4> Download Secure Boot File To Flash
| <5> Change Boot Parameter|
| <6> Exit To Main Menu|
| <Be Sure To Modify Parameter Before Downloading! >
===============================================================
Enter your choice(1-6):
1 Downloading port application files to memory and starting them via Ethernet port.
Enter <1> in Ethernet port sub-menu and the system will download via Ethernet
port from the host to memory. It then decompresses them and runs start file upon
skipping to program ingress.
2 Downloading the main boot file to Flash via Ethernet port
Enter <2> in Ethernet port sub-menu and the system will download the main boot
file from the host to Flash.
3 Downloading the backup boot file to Flash via Ethernet port
Enter <3> in Ethernet port sub-menu and the system will download the backup
boot file from the host to Flash via Ethernet port.
4 Downloading the secure boot file to Flash via Ethernet port
Enter <4> in Ethernet port sub-menu and the system will download the secure
boot file from the host to Flash via Ethernet port.
5 Modifying Ethernet port parameters
Enter <5> in Ethernet port sub-menu to modify parameters of the Ethernet port.
The following information is displayed:
Two protocols for download, tftp & ftp. You can modify the flags following the
menu.
tftp--0x80, ftp--0x0.
Available Boot Device: [wancom]
boot device : wancom0Ethernet device name
processor number: 0
host name : host
file name : c:/share/system.bin Host file name
inet on ethernet (e):
inet on backplane (b):
host inet (h) : 192.168.0.91Host IP address
gateway inet (g):
user (u) : FTP username
ftp password (pw) (blank = use rsh): taotaoFTP user password
flags (f) : 0x0(FTP)/0x80(TFTP) File transfer type
target name (tn):
startup script (s):