Filter
Top Products
Troubleshooting Application Software Upgrade 55
file to be downloaded is under the TFTP root directory and the cable is connected
properly.
Fault 3 Start the Router, upgrade the software with the TFTP approach, and the system
displays the following prompt:
DownLoad Program To Flash Through Net Port
boot device : wancom
unit number : 0
processor number : 0
file name : 6000.bin
inet on ethernet (e) : 1.1.1.1
host inet (h) : 1.1.1.3
user (u) : user
ftp password (pw) : password
flags (f) : 0x80
Attached TCP/IP interface to wancom0.
Attaching network interface lo0... done.
Loading... tftpGet: Error occurred while transferring the file.
A bad file or twisted pair doesn't link correctly!Loading Failed
Troubleshooting
The problem occurs because the IP address of the computer is not correctly
configured. To solve the problem, make a correct configuration of the IP address.
Fault 4 Start the Router, upgrade the software with the TFTP approach, and the system
displays the following prompt:
DownLoad Program To Flash Through Net Port
boot device : wancom
unit number : 0
processor number : 0
file name : 6000.bin
inet on ethernet (e) : 1.1.1.1
host inet (h) : 1.1.1.2
user (u) : user
ftp password (pw) : password
flags (f) : 0x80
Loading... Done
1000 Bytes Downloaded.Crc Error!
Troubleshooting
The problem occurs because the downloaded file is not the application of 6000
Router. To solve the problem, specify a correct application.
Bar code labels display product and maintenance information on the router chassis
and FIC.