Filter
Top Products
2-12 CHAPTER 2: INSTALLING THE NETWORK DRIVER
11 Click OK to accept the default settings for the
CardBus PC Card or enter new settings if requested by
your MIS department.
The Network Settings Window appears.
12 Click OK to bring up the TCP/IP configuration window.
13 Enter the IP address.
14 Click OK.
If networking has not been installed, follow the prompts to
complete networking installation.
15 Remove the LAN Installation Disk and click Restart
Now to complete installation.
The network driver installation is complete. To confirm
successful installation use the File Manager to browse
the network.
Windows for Workgroups (WFW)
Before you begin installing the network driver, obtain the
LAN Installation Disk and Windows for Workgroups v3.11
installation files (on hard disk, floppy diskettes, or CD-ROM).
The LAN Installation Disk contains a subdirectory structure
and files that make it an OEM import disk for WFW.
Ask your MIS department for the following information:
■ Which NDIS driver should you install - the NDIS 3 DOS
enhanced-mode driver or the NDIS 2.0 16-bit DOS
real-mode driver?
■ Transport and Network protocol layer used in the
Microsoft Windows Network
■ WFW 3.11 workgroup name
If you installed any other network adapter or network
driver in the notebook, consult your system administrator
for further instructions.