Filter
Top Products
3-14 CHAPTER 3: TROUBLESHOOTING
3 Select 3Com Megahertz 10/100 LAN CardBus PC Card
and click Properties.
4 Change I/O or IRQ value and click Confirm.
Changing the I/O, IRQ, or Memory Range
If you discover resource conflicts, you can change the I/O
Base Address, Interrupt Request (IRQ), or Memory Range
using Windows 95.
1 Double-click the System icon in the Control Panel.
2 In the System Properties window, click Network
Adapters.
3 Double-click 3Com Megahertz 10/100 LAN CardBus
PC Card Manual Load.
4 Select the Resources tab.
5 Select Input/Output Range, Interrupt Request, or
Memory Range.
In Windows 95 OSR2, the memory range value should be
the same as the CardBus socket.
6 Click the Change Settings button.
7 Change the value and click OK.
8 Restart the notebook to change the values.
Disabling PC Card (PCMCIA) Support for Windows 95
If you have a problem using two PC Cards at the same
time, follow these instructions to disable PC Card
support. You cannot use another PC Card while PCMCIA
Support is disabled.
1 Double-click the System icon in the Control Panel.
The System Properties window appears.
2 Click the Device Manager tab.
3 Click Property and place a check mark next to
Disable the Device.
If PCMCIA socket is not listed, PC Card support is already
disabled.