Filter
Top Products
3Com PC Card Diagnostics Program 3-5
For Windows NT v3.51, select File>Run, and type
tnicdiag.exe
When you install the network driver (Chapter 2) the
3Com logo appears in the Windows 95 and Windows NT
4.0 tray at the bottom of your screen after you reboot.
You can double-click the logo to run the 3Com PC Card
Diagnostics program.
Close down the PC Card Diagnostics program before you
reboot or remove the CardBus PC Card.
The PC Card Diagnostics general screen appears as shown
in Figure 3-3.
Figure 3-3 PC Card Diagnostics General Screen
If you have disabled the 3Com icon, you can re-enable
the 3Com logo on your Windows 95 and Windows NT
task bar by clicking the box next to Enable Tray Control.
To display the CardBus PC Card help system, click the
Help button on the PC Card Diagnostics General screen.