Filter
Top Products
17
3M
™
Pocket Projector MP220
© 2012 3M. All Rights Reserved.
Power Button
The power button turns on or shuts down the projector. When you turn on the
projector, it is ready to use in 30 seconds. While the projector is on, you can turn
the projector’s lamp on or off using the power button. The projector's lamp turns
on and off in only a second. You can turn on the projector's lamp by pressing any
button on the projector.
Turning the Projector On
Press the power button.
Note that the projector might take 30 seconds or more to power on.
Turning the Projector Off
1 Press and hold the power button until the device options menu appears on the
screen.
2 Select Power off from the menu.
3 Confirm that you wish to turn the projector off by selecting OK
Turning the Lamp On and Off
You can turn the projector's lamp off without turning the projector off. Press
and quickly release the power button and the projector's lamp with turn off. The
projector lamp will turn off immediately while the cooling fans continue to run for a
few seconds.
While the projector lamp is off, the status indicator will flash green. This tells you
that the lamp is off but the projector is still on. Press any button on the projector
and the lamp will turn on.
Important Note: When the lamp is off, the projector continues to use power. Do
not place projector in a bag in this state as it can easily be turned back on.