Filter
Top Products
EtherHub 1500 System User’s Guide
4-10 Setup and Configuration
Changing System Configuration
Use the Configuration command from the System Menu to
modify current values for the following parameters:
Parameter Description
IP Address IP address of the agent you’re managing. The EtherHub system may be run on SNMP
protocol over UDP/IP transport protocol. In this environment, all systems on the Internet,
such as network interconnection devices and Network Management Stations (e.g., the PC
running AccView) are assigned an IP address.
MAC Address Hardware address of EtherHub-16mi
+
Subnet Mask Subnet mask of the agent you’ve selected. This mask identifies the host address bits used
for routing to specific subnets.
Default Gateway Default gateway used in passing trap messages from the EtherHub agent to the
management station.
Default NMS For internal use only.
NMS-Download File For internal use only.
IPX Frame Type The selected format used on the LAN; i.e., this type is that used by the IPX network where
the EtherHub-16mi
+
is installed. If the specified frame type is not detected, the EtherHub-
16mi
+
will automatically detect the current type. (Values: 802.3, Ethernet II, SNAP, 802.2)
IPX Network Number Identifies the IPX network number for the connected slot.
Assigning Trap Managers
Use the Trap Managers command from the System Menu to
modify current values for the following parameters:
Parameter Description
SNMP Community Names The community strings authorized for trap management access. All community strings used
for IP and IPX Trap Managers must be listed in this table.
Community Name A community entry authorized for trap management access.
Access Management access is restricted to read-only (RO) or read/write (RW).
Status The status of the current entry can be set to VALID or INVALID.
IP Trap Managers IP management stations selected to receive trap messages from the system.
IP Address IP address of the management station.
Community Name The community string required for trap management access.
Status The status of the current entry can be set to VALID or INVALID.
IPX Trap Managers IPX management stations selected to receive trap messages from the system.
Net Number Identifies the IPX network number for the connected slot.
Node ID MAC address of the authorized trap manager.
Community Name The community string required for trap management access.
Status The status of the current entry can be set to VALID or INVALID.