Filter
Top Products
EtherHub 1500 System User’s Guide
4-16 Setup and Configuration
Using the Configure Button
Depending on the model you purchased, there are 5 (EtherHub-
16i
+
) or 6 (EtherHub-16mi
+
) configuration functions accessed in
sequence using the Configure button, including:
• Segment Setting
• Hub ID Setting
• Master Agent Setting (EtherHub-16mi
+
only)
• Demo Function
• Diagnostic Function
• Reset Function.
A "long press" on the button allows you to switch from one
function to the next. While a "short press" switches between
selections within each function. LED indicators light up to
indicate which configuration function the system is in.
F
To avoid unauthorized configuration changes, you may disable the
Configure
button via the out-of-band configuration program or via the
AccView in-band network management program.
Before using the Configure button, remember that:
• A "long press" means pressing the
Configure button for
more than 2 seconds and then releasing the button. While a
"short press" means pressing the
Configure button and
immediately releasing it.
• A "long press" has 2 functions. (1) It works like an [Enter]
key implementing the last selection displayed by the LED
indicators for the current function. (2) It brings the system to
the next configuration function.