Accton Technology 1500 Switch User Manual


 
EtherHub 1500 System User’s Guide
2 Index
EtherHub-SBH • 1-3
Event Activation • 4-15
F
Factory Settings • 4-9
FCC Warning • i
flash ROM • 4-11
FlexBus 1500 • 2-16
Management Link • 4-3
Specifications • A-2
Frame • 4-14, 4-15
Frame alignment errors • 4-15
H
Hardware Description • 2-1
Front Panel • 2-1
Rear Panel • 2-16
Hardware Installation • 3-1
Hardware Repair Service • C-1
Hot Removable Function • 4-5
Hub ID • 2-10, 4-12
Hub ID LEDs • 2-10
Hub ID Setting • 4-3, 4-18
Hub Position • 4-12
I
In-Band Configuration • 3-10
Information • 4-9
Installing an SNMP Backup Agent • 3-10
Interactive Fast Fax • C-3
Interhub LED • 2-3
IP Trap Managers • 4-10
IPX Frame Type • 4-10
IPX Network Number • 4-10
IPX Trap Managers • 4-10
Isolated LED • 2-3
J
Jabber • 2-6
L
LED Indicators
Alert • 2-7
Collision • 2-8
Diagnostic Test LED Indicators • 2-13
Hub ID LEDs • 2-10
Interhub • 2-3
Isolated LED • 2-3
Jabber • 2-6
Monitor • 2-5
PWR/CPU • 2-3
Segment LEDs • 2-9
Serial • 2-4
SNMP • 2-5
Terminator • 2-4
Utilization • 2-7
Limited Warranty • C-4
Link • 2-12
Link State • 4-13
LINK/TRAFFIC LEDs • 2-12
Local Out-of-Band Configuration • 3-7
M
MAC Address • 4-10
Management Link • 4-3
Master Agent Setting • 4-19
Master Port • 4-13
Monitor LED • 2-5
Mounting Hubs on a Rack • 3-4
Multi-Segment Architecture • 4-2