Filter
Top Products
98 Troubleshooting
Running the Diagnostics
Running PQA Diagnostics Program
Note:
Before running the PQA Diagnostics Program, make sure that the
write enable tab of the Diagnostic Program Diskette is set to
enabled.
Press -> or <- to move around the main menu. Press enter to enable the
selected option. The main options are Diag, Result, SysInfo, Option and Exit.
The Diag option lets you select testing items and times.
The following screen appears when you select Diag from the main menu:
This screen allows you to specify the number of tests to perform. The options
are as follows:
Manual Test performs a single test and manually checks the selected test
items in sequence.
PQA Vx_x xx-xx-xx
Diag
Result
SysInfo
Option
Exit
PQA Vx_x xx-xx-xx
Diag
Result
SysInfo
Option
Exit
Diag
MANUAL TEST
AUTO TEST
720.book Page 98 Saturday, March 6, 1999 10:00 AM