Filter
Top Products
100 Troubleshooting
The screen below appears if you select AUTO Test.
Specify the desired number of tests and press Enter. After you specify the
number of tests to perform, the screen shows a list of test items (see below):
.
Move the highlight bar from one item to another. Press space to enable or
disable the item. Press Enter to view the available suboptions of each
selected item. Press Esc to close the submenu.
The right corner screen information gives you the available function keys and
the specified test number.
•
Space Enables/disables the item
•
ESC Exits the program
•
F1 Help
•
F2 Tests the selected item(s)
•
Enter Opens the available suboptions
•
Test Times Indicates the number of tests to perform.
Note: The F1 and F2 keys function only after you finish configuring the
Test option.
PQA Vx_x xx-xx-xx
Diag
Result
SysInfo
Option
Exit
Diag
MANUAL TEST
AUTO TEST
TEST COUNT VALUE (1...9999) 1
PQA Vx_x xx-xx-xx
Diag
Resoult
SysInfo
Option
Exit
Diag
MANUAL TEST
AUTO TEST
Test Items
[ ] Sytem Board
[ ] Memory
[ ] Keyboard
[ ] Video
[ ] Parallel Port
[ ] Serial Port
[ ] Diskette Drive
[ ] Hard Disk
[ ] CD-ROM
[ ] Coprocessor
[ ] Pointing Dev.
[ ] Cache
SPACE: mark/ummark selecting item
ESC : return to upper menu
F2 : test the marked item(s)
ENTER: open subitem’s menu
Test Times = 1
720.book Page 100 Saturday, March 6, 1999 10:00 AM