Filter
Top Products
86 Troubleshooting
Flash Memory Update:
The flash memory update is required for the following conditions:
New versions of system programs
New features or options
Power System Checkout
To verify the symptom of the problem, power on the computer using each of
the following power sources:
1. Remove the battery pack and diskette drive.
2. Connect the AC Adapter and check that power is supplied.
3. Disconnect the AC Adapter and install the charged battery pack; then
check that power is supplied by the battery pack.
If you suspect a power problem, see the appropriate power supply checkout
in the following list:
“Checking the AC Adapter”
“Checking Operational Charging”
“Checking the Battery Pack”
Checking the AC Adapter:
If the power problem occurs only when the port replicator is used,
replace the port replicator.
If the power-on indicator does not turn on, check the power cord of the
AC Adapter for correct continuity and installation.
If the operational charge does not work, go to “Checking Operational
Charging.”
720.book Page 86 Saturday, March 6, 1999 10:00 AM