Filter
Top Products
Chapter 2 49
The table below describes the parameters in this screen. Settings in boldface
are the default and suggested parameter settings.
Note: To set the User Password, the Password on boot or Password
Check During Resume parameters, you need to set the
Supervisor Password first.
Parameter Description
Supervisor
Password is
When set, this password protects the computer and this Setup
Utility from unauthorized entry. It also protects certain
parameters in the Setup Utility.
When Password on boot and/or Password Check During
Resume is enabled, you need to enter this password to continue
operation.
Options:
Disabled
or Enabled
User
Password is
When set, this password protects the computer from
unauthorized entry.
When Password on boot and/or Password Check During
Resume is enabled, you need to enter this password to continue
operation.
Before setting the User Password, you need to set the
Supervisor Password.
Options:
Disabled
or Enabled
Set
Supervisor
Password
Press
Enter
to set the Supervisor Password.
Set User
Password
Press
Enter
to set the User Password.
Password on
boot
When enabled, the computer prompts you for a password when
the computer boots up.
Options:
Enabled
or Disabled
Password
Check During
Resume
When enabled, the computer prompts you for a password when
the computer resumes from Hibernation mode.
Options:
Disabled
or Enabled
720.book Page 49 Saturday, March 6, 1999 10:00 AM