Filter
Top Products
Machine Maintenance Procedures 3-27
Speakers Removal 0
Prerequisite:
Upper Cover Removal
1. Locate left speaker (A) and right speaker (B) on upper cover.
2. Remove the following screws:
two (2) screws (C) from left speaker (A)
two (2) screws (C) from right speaker (B).
3. Release cables from cable clasps.
4. Remove speakers from lower cover.
Figure 3-28. Speakers
Speakers Installation 0
1. Install speakers into upper cover.
2. Install and secure following screws:
two (2) screws (C) to left speaker (A)
two (2) screws (C) to right speaker (B)
3. Install cables into cable clasps.
4. Install upper cover.
ID Size Quantity Screw Type
CM2x3 4
A
B
C
C