Filter
Top Products
Machine Maintenance Procedures 3-41
4. Move along side edges until bezel is separated from LCD cover.
5. Remove bezel.
LCD Bezel Installation 0
1. Align hinges side of bezel to LCD cover and press down until there is no gap between
bezel and LCD module.
CAUTION:
!
Make sure cables do not get caught underneath bezel, it may cause damage to
cables.
2. Install and secure screws (A) to LCD cover (Figure 3-42).
3. Install screw caps (A).
4. Install LCD module.
ID Size Quantity Screw Type
E M2.5x6 Ni 2