Filter
Top Products
3-30 Machine Maintenance Procedures
Mainboard Removal 0
Prerequisite:
Upper Cover Removal
NOTE:
NOTE:
WLAN cables shown in the following images may not reflect the final product.
1. Disconnect following cables:
microphone cable (A) from mainboard connector (E)
LVDS cable (G) from mainboard connector (H)
USB module cable (B) from mainboard connector (D)
ODD board cable (F) from mainboard connector (C)
2. Remove following screws:
screw (J) from mainboard
three (3) screws (K) from fan module
Figure 3-31. Mainboard
A
E
G
H
B
D
F
C
J
K
P