Filter
Top Products
2-8 System Utilities
Security 0
The Security tab shows parameters that safeguard and protect the computer from
unauthorized use.
Figure 2-3. BIOS Security
Table 2-3 describes the parameters shown in Figure 2-3.
Table 2-3. BIOS Security
Parameter Description Option
Supervisor Password Is
Supervisor password setting
Clear or Set
User Password Is
User password setting
Clear or Set
Set Supervisor Password
Option to set supervisor password.
N/A
Set User Password
Option to set user password.
N/A
Set HDD Password Enter HDD Password. N/A
Password on Boot
CAUTION:
!
If Power-on Password authentication is
enabled, the BIOS password can only be
cleared by initiating the Crisis Disk Recovery
procedure. Refer to BIOS Recovery by Crisis
Disk.
Shows if password is required during system boot
Disabled or
Enabled
Item Specific Help
Install or Change the
password and the length
of password must be less
than one words.
F1
ESC
Help
Exit
Select Item
Select Menu
Change Values
Select SubMenu
Enter
F9
F10
Setup Default
Save and Exit
Clear
Clear
Clear
[Disabled]
Clear
Clear
Clear
[Disabled]
Supervisor Password Is:
User Password Is:
HDD Password Is:
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot
Supervisor Password Is:
User Password Is:
HDD Password Is:
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot
F5/F6
InsydeH20 Setup Utility Rev. 3.5
Information
Main Boot
Exit
Security