Filter
Top Products
Megabit Modem 500L Installation Manual 11
PR
EL
I
M
I
N
A
RY
3
INSTALLING THE MODEM
The Megabit Modem 500L is easy to install by:
• attaching adhesive-backed feet
• setting the MDI/MDI-X switch
• connecting a cable from the modem to a PC or an Ethernet hub for LAN service
• connecting a phone cord from the modem to a wall phone jack for DMT ADSL Internet
or other WAN application service
• connecting a power cable to a local power outlet
Perform the installation on the following pages (see “Location for Modem Installation” on
page 6 to determine where to place modems). Use the installation kit parts listed below in
the installation procedures.
Part Function
Rubber adhesive-backed
feet (four)
Attaches to the base of the modem.
Black cable Connects the modem 10/100BASE-T connector to the LAN through a hub
or to a PC NIC.
Grey cord Connects the modem ADSL connector to the RJ-11 wall jack with DMT
ADSL service.
Power cable Connects the modem Power connector to the local power source. Power
supply optionally has a power cord. (See “Choose a Power Cable” on
page 9 for selection options.)