Filter
Top Products
PRELIMINARY Chapter 6: Configuring Sessions
Megabit Modem 500L Installation Manual 39
PR
EL
I
M
I
N
A
RY
Configuring the LAN
1 Click EasySession on the Main Menu to access the EasySession page.
2 At the top of the
EasySession page, click Edit next to LAN Configuration to display the
PPP Over ATM LAN Configuration page.
3 Do the following to configure the LAN:
Enter the IP Address and IP Net Mask (subnet mask) for the modem Ethernet
10/100BASE-T LAN port. The IP address will not take effect, however, until the
modem is reset.
Select DHCP Enable if you want to enable the modem to act as a DHCP server to
automatically assign IP addresses to devices on the LAN. If you enable DHCP,
ensure that all devices on the LAN have the TCP/IP stack set to
Obtain an IP address
automatically
(see page 18).