Filter
Top Products
PRELIMINARY Chapter 5: Configuring System Settings
Megabit Modem 500L Installation Manual 29
PR
EL
I
M
I
N
A
RY
DEFINING SNMP PARAMETERS
The modem has an SNMP agent that allows it to be managed remotely by a Network
Management System (NMS). See page 58 for more information about managing the modem
through SNMP.
1 Click
System from the Main Menu.
2 Click
SNMP Parameters on the System Menu.
3 Do the following:
Select Enable Trap Sending if you want the modem to send traps to a server on
your LAN.
Enter the Trap Server IP Address for the server to which the traps will be sent.
Enter the Trap Server Net Mask (subnet mask) for the server to which the traps will
be sent.
Click Home
to return to the
Main Menu