Filter
Top Products
Configuring PPP over ATM Sessions PRELIMINARY
38 Megabit Modem 500L Installation Manual
PR
EL
I
M
I
N
A
RY
Defining User Assignment Parameters
Enter the IP address for the PC that is assigned to this session.
1 Do the following to define
Users’ Assignments:
2 Click Add to accept a user assignment you entered in Step 1.
Delete a user assignment as follows:
1 Highlight the user assignment listed in
(see figure above) then click Delete. (When you
highlight the user assignment, it automatically displays in the
Service Name and User’s IP
Address
fields.)
2 After adding or deleting all user assignments, click
Done to return to the EasySession page.
You can map your PC to only one of the three sessions at a time. If you want
to use a different session, select User Assignment on the PPP over ATM WAN
Configuration page and move the user assignment to another session.
Enter the Service Name you entered for the session shown in field on page 36.
Enter the User’s IP Address for the LAN-side user that you assign to this session.
(If the PC is mapped to one of the other two sessions, you must remove it from that
session to map it to this session.)
Displays the Service Name and User’s IP Address for the configured session.