Filter
Top Products
Configuring PPP over ATM Sessions PRELIMINARY
36 Megabit Modem 500L Installation Manual
PR
EL
I
M
I
N
A
RY
Configuring the WAN
Configure the WAN parameters for PPP over ATM sessions between the Megabit Modem 500L
and the service provider.
1 Do the following to configure the WAN:
.
Select a name for the service that is descriptive. The service name is an
identifier you use for the session and is not used for anything else. Each
service name must be unique. When you enter a service name, it displays as
the Port name for that session on the EasySession page.
Enter a descriptive name for the Service Name. The name you enter here also displays
in the
Port field on the EasySession page (the fields are linked). Use a maximum of
19 characters for the service name, with no spaces allowed in the name.
Enter the ATM VPI and ATM VCI values provided by the service provider. The
addresses are the virtual path identifier and virtual channel identifier for the session
connection (ATM) between the modem and the service provider. (See page 74 for
the VPI and VCI values you recorded from the service provider. Also, see “Mapping
an ATM Session” on page 56 for information on VPI and VCI values.)
Enter your Login Name and Login Password supplied by the service provider. (See
“Login Name / Login Password Worksheet” on page 74.)