Filter
Top Products
14 64179008APL1-5A
The ATM PVC/PVP Management sub-menu, shown
in Figure 11, allows the user to provision PVC/PVPs
for each port. (This is the same menu that can be
accessed from the ATM Port Management menu.)
The ATM Traffic Parameter Defaults sub-menu
allows the user to provision default settings for each
type of PVC/PVP that is to be provided from the Total
Access 1000 DAT. See Figure 12. The default
settings for each service type should be provisioned to
match the commonly used settings for that type. Each
PVC/PVP that needs special settings may be edited on
a per PVC/PVP basis. Settings changed when
provisioning the individual PVC/PVP override the
corresponding default setting.
Figure 11. ATM PVC/PVP Management Menu
Figure 12. ATM Traffic Parameter Defaults Menu
Total Access 1000 (ATM)
Unacknowledged Alarms: Major
ATM Traffic Parameter Defaults
Endpoint 1 -> Endpoint 2 (Both Directions)
Traffic Type PCR(0) PCR(0+1) SCR(0) SCR(0+1) MBS(0) MBS(0+1) Tagging Pkt Discard
UBR N/A Best Eff N/A N/A N/A N/A N/A Yes
CBR N/A 0 N/A N/A N/A N/A No Yes
VBR-rt N/A 0 N/A 0 N/A 0 No Yes
VBR-nrt N/A 0 N/A 0 N/A 0 No Yes
Endpoint 2 -> Endpoint 1
UBR N/A Best Eff N/A N/A N/A N/A
CBR N/A 0 N/A N/A N/A N/A
VBR-rt N/A 0 N/A 0 N/A 0
VBR-nrt N/A 0 N/A 0 N/A 0
Note: This screen allows modification of the DEFAULT settings of the
various traffic parameters. These settings can be overridden on
a per PVC/PVP basis in the PVC/PVP Management menu.
PVC/PVP Management - Card: All Port: All
Endpoint 1 Endpoint 2
Circuit ID Card Port VPI VCI <-> Card Port VPI VCI
1 ADSLloop1 BCU Netw 0 100 1 1 0 35
2 ADSLloop2 BCU Netw 0 101 1 2 0 35
3 ADSLloop3 BCU Netw 0 102 1 3 0 35
Circuit ID: ADSLloop1 Pkt Discard Tagging Done?
Select: Enabled N/A No
Endpoint1 -> Endpoint2 Endpoint2 -> Endpoint1
Service PCR(0+1) PCR(0+1)
1 UBR Best Effort Best Effort
Endpoint 1: Card Port VPI VCI <-> Endpoint 2: Card Port VPI VCI
BCU Netw 0 100 1 1 0 35
Enter # or use arrow keys to pick circuit; space bar for choices or c,d,m,n,p,t