Filter
Top Products
64179008APL1-5A 21
provisioned to match the CPE that is used at the
corresponding customer premises. The Flash Upload
sub-menu allows the user to perform a software
update using Y-modem protocol. The Card Service
State sub-menu allows the user to select between In
Service, Out of Service – Maintenance (OOS-M), and
Out of Service – Unassigned (OOS-U). The In
Service state provides full operation of the ADSL
circuit. The OOS-M service state allows the flow of
ADSL traffic, but does not provide alarms to the
network. The OOS-U service state restricts all traffic
flow for the individual ADSL port. The Reset to
Factory Defaults option resets all of the provisioning
options for the ADSL Access Module to the default
settings.
The ADSL Status Menu provides status information
for each ADSL port. Three sub-menus, including
ADSL Status, Circuit Overview, and Service State
Status, provide access to various status information.
The ADSL Status menu, shown in Figure 20,
provides detailed information about each individual
port.
Figure 20. Quad ADSL Status Menu
Total Access 1000 (ATM)
ADSL Status
ADSL Line 1 2 3 4
Link Status Up Down Down Down
Downstream Rate 8000 Kbps
Upstream Rate 992 Kbps
Downstream Margin 6.5 dB
Upstream Margin 6.0 dB
Downstream Power 19.5 dB
Upstream Power 11.9 dB
Downstream Attenuation 14.5 dB
Upstream Attenuation 16.0 dB
Max Downstream Rate 8128 Kbps
Max Upstream Rate 992 Kbps
Downstream Actual Delay 0 ms
Upstream Actual Delay 0 ms