Filter
Top Products
16 64179008APL1-5A
The IMA Group Provisioning sub-menu, shown in
Figure 14, allows the user to make changes to the
following options:
• IMA Transmit ID
• IMA TX Frame Length
• Minimum TX Active Lengths
• Minimum RX Active Lengths
• Maximum Length Differential Delay
• Group Operation Mode
The IMA Links sub-menu allows the user to enable or
disable the TX and/or RX portions of each IMA link
individually. All the options, provisionable under the
IMA Provisioning menu, may be set to the factory
default settings by choosing the option corresponding
to Restore Factory Defaults on the IMA Group
Provisioning menu.
Figure 14. IMA Group Provisioning Menu
Total Access 1000 (ATM)
Unacknowledged Alarms: None
IMA Group Provisioning
IMA Transmit ID (0-255) 1
IMA TX Frame Length 128
MRX Active Links 1
1
Max. Link Diff. Delay (0-100) 100
Group Operation Mode Out of Service - Maintenance
Note: Changing ID or Frame Length requires that All Facilities be UNASSIGNED !