Filter
Top Products
32 Symmetra PX 10-40 kW 208 V Operation & Maintenance Guide - 990-4104B
System Re-Start (if applicable)
System start-up is included with your system. If you have to move your system to a new location and
need a new start-up, remove all power modules and follow the Total Power Off procedure. Raise the
stabilizing feet.
Secure the UPS by setting the stabilizing feet
After the electrical wiring has been completed, secure the UPS in its final operating position. Use a
13/14-mm wrench (shipped with UPS) to adjust all 4 stabilizing feet until pads make solid contact
with the floor.
Level the UPS (recommended)
Adjust stabilizing feet to level from front to back and left to right.
CAUTION!
Do not move the UPS after the stabilizing feet have been lowered, or equipment
damage may occur.
13/14-mm wrench