AMX none Network Card User Manual


 
14 Introduction WAVE 2-Way Wireless Accessories and Adapters for Touch Panels
Safe handling and usage of the battery
To prevent deterioration or damage to the battery:
Do not use battery to power equipment other than the WAV-PK or WAV-
PKM.
Do not drop or subject the battery to strong physical shock.
Do not use the battery below -10°C (15°F) or above +40°C (105°F). If the
temperature exceeds this upper limit, a safety device automatically prevents
operation of the battery.
Standard Power Supply
The standard power supply furnished with the WAV-PK and WAV-PKM is shown
in Figure 16. The power supply can be used for primary power or battery charging
of the WAV-PKs or WAV-PKMs battery. Refer to the Battery Charging subsection in
this manual for more information. The power supply barrel connector plugs into the
side of the WAV-PK or the back of the WAV-PKM.
Note
The WAV-BP or WAV-BPM
battery must be charged be-
fore use. Either battery will
require a 4-hour charge.
Figure 16
Power supply/battery charger