Filter
Top Products
34006452EN/AC - Page 60
Options
10.4 "Vision" display
10.5 "Remote vision" display
10.6 Insulating and Mains 1, Mains 2 and load voltage matching transformer
The "Vision" display may be installed in all types of cubicles (UPS or Static Switch Cubicle).
The "Vision" display can operate in two different modes:
– mono-cubicle: the "Vision" display monitors only the cubicle in which it is installed;
– multi-cubicle: "Vision" display can monitor all system cubicles (up to eight maximum). In this mode, the system is equipped
with only one "Vision" display which may be installed in any of the cubicles.
Installed in a special enclosure, the "Remote vision" display provides the user with remote indications on system status.
This transformer may be used to match Mains 2 voltage to that of the inverter, to create galvanic insulation between the load
and the Mains or to create the appropriate neutral system.
MGE GALAXY 9000 800 kVA
SALLE IQ
Load protected
125 kVA
120%
100%
50%
80%
0
0 Hour 50 Min.
100%
50%
0
Available Backup Time Load level
Normal AC
Bypass AC
Load
equipment
Q1 Q5N
QF1
Q4S
Q3BP
15:24:32 30/05/2005
Home
Alarms
Online
Trend
Statistics
Rectifier
Battery
Inverter
Bypass
Output
Set up
MGE GALAXY 9000 800 kVA
SALLE IQ
Load protected
125 kVA
120%
100%
50%
80%
0
0 Hour 50 Min.
100%
50%
0
Available Backup Time Load level
Normal AC
Bypass AC
Load
equipment
Q1 Q5N
QF1
Q4S
Q3BP
15:24:32 30/05/2005
Home
Alarms
Online
Trend
Statistics
Rectifier
Battery
Inverter
Bypass
Output
Set up