Filter
Top Products
The Channel Maintenance Menu is accessed from the Administrator
Command Menu, and is available if you are operating in non-secure
mode or if you are the system administrator. Here you can add, delete
or alter individual channels.
Adding New Channels (base unit only)
1. Select ‘Add channel’ from the Channel Maintenance Menu. Type in
a new channel name, up to 14 characters long, and press Enter.
2. Type in the channel number for the computer you are naming and
press Enter.
3. When prompted for another cascade level, type N and press Enter.
Press Esc at any point to exit this operation without adding the channel.
Adding New Channels (with a cascaded unit)
1. Select “Add channel” from the Channel Maintenance Menu. Type
in a new channel name, up to 14 characters long, and press Enter.
2. Type in the switch channel number that corresponds to the port to
which the second cascaded switch unit is attached and press Enter.
Games
APC KVM Switch
Configure Channel
Program Manager
Add Channel
ENTER-accept ESC-previous
Change ChannelAddress
Options For ID window
Dwell Time For ID window
Alpha Scan Dwell Time
Delete Channel
Change Channel Name
THE CHANNEL MAINTENANCE WINDOW
4.4 Basic Channel Maintenance
15