Filter
Top Products
This menu selection lets you set the time that the ID Window remains
on screen after a channel switch. Each channel can be configured
independently. The default time is set for 5 seconds.
1. From the main OSD Window, press the Control key twice or type
Alt-M to access the Command Menu.
2. Select ‘‘Channel maintenance’’ from the Command Menu.
3. Choose the option ‘‘Dwell time for ID window’’.
4. Enter a number between 0-255 seconds. Entering 0 disables the ID
Window. Entering 255 allows the ID Window to stay on screen the
entire time the channel is active.
Setting the ID Window Dwell Time
18