Filter
Top Products
Uninstalling Pairing
1. Press either Control key twice to bring up the On-Screen Display
Administrator Channel List menu.
2. Press Control twice again, select ‘‘Administrator Functions’’ and
press Enter.
3. Select ‘‘Unit Configuration’’ and press Enter.
4. Change the unit configuration to ‘‘Option 1, Tiered’’.
5. Press Enter to save your selection and Esc to exit OSD.
6. Disconnect the serial and video cables from both switch units.
7. Attach a keyboard and monitor directly to the slave unit.
8. Repeat instructions 1-5 on the slave unit.
9. The units may now be cascaded together or used separately.
Note: Please note that the channel list will need to be modified
according to the Basic Channel Maintenance instructions in the
manual after uninstalling pairing.
32