Filter
Top Products
10.4.5 link-aggregation
This command is used to configure link aggregation
10.4.5.1 link-aggregation addport
This command is used to configure LAG groups
Format Link Aggregation addport lag <LAG-ID>
Mode Global Config
10.4.5.2 link aggregation delport
This command remove ports from LAG
1) Link Aggregation delport all
This command remove all ports from a LAG
Format link-aggregation-delport all lag <LAG-ID>
Mode Global Config
2) link aggregation delport lag
This command remove specify LAG group
Format link aggregation delport lag <LAG-ID>
Mode Global Config
10.4.6 LLDP
10.4.6.1 lldp enable
This command is used to enable lldp functions
Format lldp enable
Mode Global Config
26
10.4.6.2 lldp disable
This command is used to disable lldp functions
Format lldp disable
Mode Global Config
10.4.6.3 lldp adv-interval
This command is used to specify advertised interval in seconds
Format lldp adv-interval <5-32768>
Mode Global Config
10.4.6.4 lldp fast-startcnt
This command is used to specify advertised interval in seconds
Format lldp fast-startcnt <1-10>
Mode Global Config
10.4.6.5 lldp hold
This command is used to specify hold value
Format lldp hold <2-10>
Mode Global Config
10.4.6.6 lldp notify-interval
This command is used to specify notification interval in seconds
Format lldp notify-interval <5-3600>
Mode Global Config
10.4.6.7 lldp reinit-delay
This command is used to specify re-initialization delay in seconds
Format lldp reinit-delay <1-10>
Mode Global Config
10.4.6.8 lldp tx-delay
Transmit Delay in seconds
Format lldp tx-delay <1-8192>
Mode Global Config
10.4.6.9 lldp mgmt-addrtxport
A range of ports can be set.
Format lldp mgmt-addrtxport ports <port list>
Mode Global Config
e.g. switch(config)# lldp mgmt-addrtxport ports 1
switch(config)# lldp mgmt-addrtxport ports 1-4
119 Asante IntraCore IC39240/480 User’s Manual