Filter
Top Products
Format network mgmt-vlan <vlan-ID>
Mode Global Config
10.4.13.2 network parms
This command configures static IP address of the switch.
Format network parms <IP addr> <subnet mask> <gateway>
Mode Global Config
10.4.19 network protocol
This command configure switch dhcp client.
Format network protocol {dhcp|none}
Mode Global Config
10.4.13.4 network dhcp-relay
Configure switch dhcp relay functions.
1) network dhcp-relay mode
This command configures dhcp relay mode.
Format network dhcp-relay mode {enable|disable}
Mode Global Config
2) network dhcp-relay server
This command configures dhcp-relay server ip-address.
Format network dhcp-relay server <A.B.C.D>
Mode Global Config
3) network dhcp-relay vlan
Configure dhcp-relay option-82 vlan information.
network dhcp-relay vlan <vlan-ID> add
This command enters a vlan which will be enable DHCP-relay option82.
Format network dhcp-relay vlan <vlan-ID> add
Mode Global Config
network dhcp-relay vlan <vlan-ID> remove
This command enters a vlan which will be disable dhcp-relay option82.
Format network dhcp-relay vlan <vlan-ID> remove
Mode Global Config
10.4.13.5 network sysinfo
Configure switch system information.
Network sysinfo sysname
This command configures system name.
Format network sysinfo sysname <WORD>
Mode Global Config
network sysinfo syslocate
This command configures system location.
Format network sysinfo syslocate <WORD>
Mode Global Config
30
network sysinfo syscontact
This command configures system contact information.
Format network sysinfo syscontact <WORD>
Mode Global Config
10.4.13.6 network admin-timeout
This command configures web/console admin time out interval.
‘0’ means disable.
Format network admin-timeout <0-65535>
Mode Global Config
10.4.14 port-all commands
10.4.14.1 port-all admin-mode
This command configures ports admin mode.
Format port-all admin-mode {enable | disable}
Mode Global Config
10.4.14.2 port-all auto-negotiate
122 Asante IntraCore IC39240/480 User’s Manual