Filter
Top Products
5-345-34
5-345-34
5-34
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
c. Repeat step b to select the
target drive
.
d. After selecting the
source and target
drives, the following
pop-up menu
appears.
Manual configurationManual configuration
Manual configurationManual configuration
Manual configuration
a. Select
ManualManual
ManualManual
Manual
configurationconfiguration
configurationconfiguration
configuration and press
<Enter>. The selection
bar moves to the Physical
Drives menu.
b. Using the up or down arrow
keys, select the
source drive
and press <Enter>.
3. Select your desired method of configuration.
Auto configurationAuto configuration
Auto configurationAuto configuration
Auto configuration
a. Select Auto Configuration then press <Enter>.
b. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
c. Press <Y> to confirm or <N> to return to the Main Menu.
• Auto-configuration creates a RAID 1 set without a backup copy of
the current source disk data.
• When migrating a single hard disk drive to a RAID 1 set, use of the
Manual configuration is recommended.
MAIN MENU
Auto configuration
Manual configuration
Create with data copy
Create without data copy
• The
Create with data copyCreate with data copy
Create with data copyCreate with data copy
Create with data copy option allows you to copy the
current data from the source drive to the mirror drive.
• Select
Create with data copy Create with data copy
Create with data copy Create with data copy
Create with data copy if you have important data in
your source drive.
• The
Create without data copy Create without data copy
Create without data copy Create without data copy
Create without data copy option disables the disk copy
function of the Mirrored set.
• If you selected
Create without data copyCreate without data copy
Create without data copyCreate without data copy
Create without data copy, the RAID 1 set must
be repartitioned and reformatted to guarantee the consistency of its
contents.