Filter
Top Products
5-365-36
5-365-36
5-36
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
3. Select your desired method of configuration.
Auto configurationAuto configuration
Auto configurationAuto configuration
Auto configuration
a. Select Auto Configuration then press <Enter>.
b. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
c. Press <Y> to confirm or <N> to return to the Main Menu.
MAIN MENU
Auto configuration
Manual configuration
chunk size
4K
8K
16K
32K
64K
128K
Manual configurationManual configuration
Manual configurationManual configuration
Manual configuration
a. Select
ManualManual
ManualManual
Manual
configurationconfiguration
configurationconfiguration
configuration and
press <Enter>. The
following pop-up
menu appears.
b. Use the up or down
arrow keys to select
a chunk size
appropriate to your
drive usage then press <Enter>.
TIP: TIP:
TIP: TIP:
TIP: For server systems, we recommend using a lower array block size.
For multimedia computer systems used mainly for audio and video
editing, we recommend a higher array block size for optimum
performance.
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
c. The selection bar moves to
the Physical Drive menu.
Using the up or down arrow
keys, select a drive then
press <Enter> to set the
first drive of the RAID set.
d. Repeat step c to set the second, third and fourth drive. The
number of available drives depend on the installed and enabled
physical drives in the system.
e. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
f. Press <Y> to confirm or <N> to return to the Main Menu.