Filter
Top Products
A-2A-2
A-2A-2
A-2
AppendixAppendix
AppendixAppendix
Appendix
A.1.2A.1.2
A.1.2A.1.2
A.1.2
Installing SATA hard drivesInstalling SATA hard drives
Installing SATA hard drivesInstalling SATA hard drives
Installing SATA hard drives
To install Serial ATA hard drives:
1. Connect one end of the first SATA signal cable to the SATA
connector labeled
SATA 1SATA 1
SATA 1SATA 1
SATA 1.
2. Connect the other end of the SATA signal cable to the SATA
connector on the first drive.
3. Connect one end of the second SATA signal cable to the other
SATA connector labeled
SATA 2SATA 2
SATA 2SATA 2
SATA 2.
4. Connect the other end of the second SATA signal cable to the
SATA connector on the second drive.
5. Connect the 4-pin ATX SATA power plug to the SATA
extension module.
Your Serial ATA power plug comes with one (1) 4-pin ATX power
connector and two (2) Serial ATA power connectors.
6. Connect one SATA power connector to the first drive.
7. Connect the other Serial ATA power connector to the second drive.
33
33
3
55
55
5
11
11
1
77
77
7
44
44
4
66
66
6
22
22
2