Filter
Top Products
5-145-14
5-145-14
5-14
Chapter 5: Driver installationChapter 5: Driver installation
Chapter 5: Driver installationChapter 5: Driver installation
Chapter 5: Driver installation
MenuMenu
MenuMenu
Menu
DescriptionDescription
DescriptionDescription
Description
Configure Allows you to create RAID 0, RAID 1, or RAID 10 set using
the Easy Configuration or the New Configuration command.
This menu also allows you to view, add, or clear RAID
configurations or select the boot drive
Initialize Allows you to initialize the logical drives of a created RAID
set
Objects Allows you to initialize logical drives or change the logical
drive parameters
Rebuild Allows you to rebuild failed drives
Check Consistency Allows you to check the data consistency of the logical
drives of a created RAID set
Creating a RAID setCreating a RAID set
Creating a RAID setCreating a RAID set
Creating a RAID set
The LSI Logic Embedded SATA RAID Setup Utility allows you to create a
RAID 0 or RAID 1 set using two types of configurations:
Easy Easy
Easy Easy
Easy and
NewNew
NewNew
New.
In
Easy ConfigurationEasy Configuration
Easy ConfigurationEasy Configuration
Easy Configuration, the logical drive parameters are set
automatically including the size and stripe size (RAID 1 only).
In
New ConfigurationNew Configuration
New ConfigurationNew Configuration
New Configuration, you manually set the logical drive parameters and
assign the set size and stripe size (RAID 1 only).
3. The utility main window appears. Use the arrow keys to select an
option from the
Management MenuManagement Menu
Management MenuManagement Menu
Management Menu, then press <Enter>. Refer to
the Management Menu descriptions below.
At the bottom of the screen is the legend box. The keys on the
legend box allow you to navigate through the setup menu options or
execute commands. The keys on the legend box vary according to the
menu level.