Filter
Top Products
ASUS P5MT-MASUS P5MT-M
ASUS P5MT-MASUS P5MT-M
ASUS P5MT-M
4-294-29
4-294-29
4-29
Power On By PCI Devices [Disabled]Power On By PCI Devices [Disabled]
Power On By PCI Devices [Disabled]Power On By PCI Devices [Disabled]
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Keyboard Wakeup PasswordKeyboard Wakeup Password
Keyboard Wakeup PasswordKeyboard Wakeup Password
Keyboard Wakeup Password
This item appears only when the Power On By PS/2 Keyboard is set to
Enabled. Select this item to set or change the keyboard wakeup password.
The
Keyboard Wakeup PasswordKeyboard Wakeup Password
Keyboard Wakeup PasswordKeyboard Wakeup Password
Keyboard Wakeup Password item that appears below shows the
default
Not InstalledNot Installed
Not InstalledNot Installed
Not Installed. After you have set a password, this item shows
InstalledInstalled
InstalledInstalled
Installed.
4.5.34.5.3
4.5.34.5.3
4.5.3
Hardware MonitorHardware Monitor
Hardware MonitorHardware Monitor
Hardware Monitor
Hardware Monitor
CPU Temperature [51ºC/122.5ºF]
MB Temperature [41ºC/105.5ºF]
CPU1 Fan Speed [3813 RPM]
CPU2 Fan Speed [N/A]
Front Fan1 Speed [N/A]
Front Fan2 Speed [N/A]
Rear Fan1 Speed [N/A]
Rear Fan2 Speed [N/A]
Smart Fan Control [Disabled]
VCORE1 Voltage [ 1.320V]
3.3V Voltage [ 3.345V]
5V Voltage [ 5.094V]
5VSB Voltage [ 4.824V]
VBAT Voltage [3.040V]
12V Voltage [11.880V]
CPU1 Temperature
CPU Temperature [xxxºC/xxxºF]CPU Temperature [xxxºC/xxxºF]
CPU Temperature [xxxºC/xxxºF]CPU Temperature [xxxºC/xxxºF]
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]MB Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]MB Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard, CPU, and ambient temperatures. Select Ignored if you do not
wish to display the detected temperatures.