Filter
Top Products
5-345-34
5-345-34
5-34
Chapter 5: Driver installationChapter 5: Driver installation
Chapter 5: Driver installationChapter 5: Driver installation
Chapter 5: Driver installation
Selecting the boot drive from a RAID setSelecting the boot drive from a RAID set
Selecting the boot drive from a RAID setSelecting the boot drive from a RAID set
Selecting the boot drive from a RAID set
You must have created a new RAID configuration before you can select the
boot drive from a RAID set. Refer to the
Creating a RAID set: UsingCreating a RAID set: Using
Creating a RAID set: UsingCreating a RAID set: Using
Creating a RAID set: Using
New Configuration New Configuration
New Configuration New Configuration
New Configuration section for details.
To select the boot drive from a RAID set:
1. From the Management Menu, select
ConfigureConfigure
ConfigureConfigure
Configure >
Select BootSelect Boot
Select BootSelect Boot
Select Boot
DriveDrive
DriveDrive
Drive, then press <Enter>.
2. When prompted, press the <SpaceBar> to select the bootable logical
drive from the list, then press <Enter>.
3. The logical drive is selected as boot drive. Press any key to continue.