Filter
Top Products
5-285-28
5-285-28
5-28
Chapter 5: Driver installationChapter 5: Driver installation
Chapter 5: Driver installationChapter 5: Driver installation
Chapter 5: Driver installation
Rebuilding failed drivesRebuilding failed drives
Rebuilding failed drivesRebuilding failed drives
Rebuilding failed drives
You can manually rebuild failed hard disk drives using the
Rebuild Rebuild
Rebuild Rebuild
Rebuild or
ObjectsObjects
ObjectsObjects
Objects command in the Management Menu.
Using the Rebuild command
To rebuild a failed hard disk drive using the
Rebuild Rebuild
Rebuild Rebuild
Rebuild command:
1. From the Management Menu, highlight
RebuildRebuild
RebuildRebuild
Rebuild, then press <Enter>.
2. The
PHYSICAL DRIVES SELECTION MENU PHYSICAL DRIVES SELECTION MENU
PHYSICAL DRIVES SELECTION MENU PHYSICAL DRIVES SELECTION MENU
PHYSICAL DRIVES SELECTION MENU displays the available
drives connected to the SATA ports. Select the drive you want to
rebuild, then press <SpaceBar>.