Filter
Top Products
6-46-4
6-46-4
6-4
Chapter 6: RAID configurationChapter 6: RAID configuration
Chapter 6: RAID configurationChapter 6: RAID configuration
Chapter 6: RAID configuration
6.2 Adaptec SCSISelect(TM) Utility!
The Adaptec SCSISelect(TM) Utility allows you to create RAID 0, 1, and 0+1
set(s) from SCSI hard disk drives connected to the SCSI connector supported
by the Adaptec embedded SCSI controller.
To enter the Adaptec SCSISelect(TM) Utility!:
1. Turn on the system after installing all the SCSI hard disk drives.
2. During POST, the Adaptec SCSI BIOS automatically detects the installed
SCSI hard disk drives and displays any existing RAID set(s). Press <Ctrl>
<A> to enter the utility.
3. The utility auto-detects the available SCSI channels. Select the SCSI
channel, then press <Enter>.