Filter
Top Products
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-182-18
2-182-18
2-18
2.7.22.7.2
2.7.22.7.2
2.7.2
Power supply modulePower supply module
Power supply modulePower supply module
Power supply module
To remove the power supply module:
1. Disconnect all the power supply plugs connected to all the system devices.
Refer to section “2.7 Cable connections” for the locations of pre-
connected cables.
2. Disconnect the main power cable from the rear
of the power supply.
3. Use a Phillips screwdriver (cross)
to remove the four screws that
secure the power supply to the
chassis.
4. Carefully lift the power supply
module from the chassis.
Screw
Screw(Rear panel)