Filter
Top Products
6-106-10
6-106-10
6-10
Chapter 6: RAID configurationChapter 6: RAID configuration
Chapter 6: RAID configurationChapter 6: RAID configuration
Chapter 6: RAID configuration
6.2.46.2.4
6.2.46.2.4
6.2.4
Creating a RAID 1 set (Mirror)Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)
To create a RAID 1 set for Fault Tolerance:
1. Follow steps 1 to 2 of the
Creating a RAID 0 set Creating a RAID 0 set
Creating a RAID 0 set Creating a RAID 0 set
Creating a RAID 0 set section.
2. Select
RAID-1 (Fault Tolerance)RAID-1 (Fault Tolerance)
RAID-1 (Fault Tolerance)RAID-1 (Fault Tolerance)
RAID-1 (Fault Tolerance)from the
Select RAID Type Select RAID Type
Select RAID Type Select RAID Type
Select RAID Type menu,
then press <Enter>.
3. Use the arrow keys to select a RAID set member, then press
<SpaceBar> to mark. An
XX
XX
X mark appears after the selected HDD.
4. Follow step 3 to select the other members of the RAID set, then press
<Enter> when finished.
Refer to the
Mirroring Requirements Mirroring Requirements
Mirroring Requirements Mirroring Requirements
Mirroring Requirements note at the bottom of the screen
to determine the number of hard disk drives required for the selected RAID
type.