Filter
Top Products
ASUS RS160-E3/PS4ASUS RS160-E3/PS4
ASUS RS160-E3/PS4ASUS RS160-E3/PS4
ASUS RS160-E3/PS4
4-134-13
4-134-13
4-13
7.7.
7.7.
7.
Serial port connector (10-1 pin COM2)Serial port connector (10-1 pin COM2)
Serial port connector (10-1 pin COM2)Serial port connector (10-1 pin COM2)
Serial port connector (10-1 pin COM2)
This connector is for a serial (COM) port. Connect the serial port module
cable to this connector, then install the module to a slot opening at the
back of the system chassis.
8.8.
8.8.
8.
CPU and system fan connectors (3-pin CPU_FAN1/2,CPU and system fan connectors (3-pin CPU_FAN1/2,
CPU and system fan connectors (3-pin CPU_FAN1/2,CPU and system fan connectors (3-pin CPU_FAN1/2,
CPU and system fan connectors (3-pin CPU_FAN1/2,
REAR_FAN1/2, FRNT_FAN1/2)REAR_FAN1/2, FRNT_FAN1/2)
REAR_FAN1/2, FRNT_FAN1/2)REAR_FAN1/2, FRNT_FAN1/2)
REAR_FAN1/2, FRNT_FAN1/2)
The fan connectors support cooling fans of 350 mA ~ 740 mA (8.88 W
max.) or a total of 2.1 A ~ 4.44 A (53.28 W max.) at +12V. Connect the
fan cables to the fan connectors on the motherboard, making sure that
the black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient
air flow inside the system may damage the motherboard components.
These are not jumpers! Do not place jumper caps on the fan connectors!
The serial port module is purchased separately.
®
PVL-D/1U/SCSI
PVL-D/1U/SCSI Serial port connectors
PIN 1
COM2
®
PVL-D/1U/SCSI
CPU_FAN1
FRNT_FAN2
CPU_FAN2
FRNT_FAN1
GND
FAN Power
FAN Speed
PWM Control
GND
FAN Power
FAN Speed
PWM Control
PVL-D/1U/SCSI Fan connectors
GND
Rotation
+12V
GND
Rotation
+12V
REAR_FAN1
GND
Rotation
+12V
GND
Rotation
+12V
REAR_FAN2
CPU_FAN1
REAR_FAN2
REAR_FAN1
FRNT_FAN2
FRNT_FAN1
CPU_FAN2