Filter
Top Products
2-132-13
2-132-13
2-13
ASUS RS160-E3/PS4ASUS RS160-E3/PS4
ASUS RS160-E3/PS4ASUS RS160-E3/PS4
ASUS RS160-E3/PS4
2.5.22.5.2
2.5.22.5.2
2.5.2
Configuring an expansion cardConfiguring an expansion card
Configuring an expansion cardConfiguring an expansion card
Configuring an expansion card
After installing the expansion card, configure the it by adjusting the
software settings.
1. Turn on the system and change the necessary BIOS settings, if any.
See Chapter 5 for information on BIOS setup.
2. Assign an IRQ to the card. Refer to the following tables.
3. Install the software drivers for the expansion card.
Standard interrupt assignmentsStandard interrupt assignments
Standard interrupt assignmentsStandard interrupt assignments
Standard interrupt assignments
IRQ assignments for this motherboardIRQ assignments for this motherboard
IRQ assignments for this motherboardIRQ assignments for this motherboard
IRQ assignments for this motherboard
IRQ Priority Standard Function
0 1 System Timer
1 2 Keyboard Controller
2 N/A Re-direct to IRQ9#
3* 11 Communications Port (COM2)
4* 12 Communications Port (COM1)
5* 13 IRQ Holder for PCI steering
6 14 Floppy Disk Controller
7* 15 Printer Port (LPT1)
8 3 System CMOS/Real Time Clock
9* 4 IRQ Holder for PCI Steering
10* 5 IRQ Holder for PCI Steering
11* 6 IRQ Holder for PCI Steering
12* 7 PS/2 Compatible Mouse Port
13 8 Numeric Data Processor
14* 9 Primary IDE Channel
15* 10 Secondary IDE Channel
* These IRQs are usually available for ISA or PCI devices.
INTA# INTB# INTC# INTD# REQ# GNT#
ICH5R IDE contrl. PIRQC# — — — — —
ICH5R SATA contrl. PIRQC# — — — — —
ICH5R SMBus contrl. PIRQB# — — — — —
ICH5R USB UHCI contrl. #1 PIRQA# — — — — —
ICH5R USB UHCI contrl.#2 PIRQD# — — — — —
ICH5R USB 2.0 EHCI contrl. PIRQH# — — — — —
AIC-7902W SCSI contrl. PXH2_A_0 PXH2_A_1 — — PXH2_A_0 PXH2_A_0
Zero-Channel RAID sockets PXH2_A_2 — — — PXH2_A_1 PXH2_A_1
ATI RAGE XL video contrl. PIRQB# — — — REQ1H# GNT1#
PCIX slot 1 (64-bit) PXH1_B_0 PXH1_B_1 PXH1_B_2 PXH1_B_3 PXH1_B_0 PXH1_B_0