Filter
Top Products
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-102-10
2-102-10
2-10
5. Carefully insert the drive tray and
push it all the way to the depth
of the bay until just a small
fraction of the tray edge
protrudes.
6. Push the tray lever until it clicks,
and secures the drive tray in
place. The drive tray is correctly
placed when its front edge aligns
with the bay edge.
7. Repeat steps 1 to 6 if you wish
to install a second ,third and/or
fourth drive.
When installed, the SCSI connector on the drive connects to the SCSI
connector on the backplane. Refer to section “2.7.2 SCSI backplane” for
illustration.