Filter
Top Products
5-205-20
5-205-20
5-20
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setup
Memory Timing ConfigurationMemory Timing Configuration
Memory Timing ConfigurationMemory Timing Configuration
Memory Timing Configuration
Memory Timing Configuration
Memclock Mode [Auto]
MCT Timing Mode [Auto]
User Config Mode [Auto]
Burst Length [4 Beats]
Hardware Memory Hole [Disabled]
MEMCLCK can be set by
the code using AUTO,
or if you use LIMIT,
you can set one of the
standard values.
Memclock Mode [Auto]
Choose [Auto] to allow the BIOS to automatically set the Real Memory
Clock Mode. Choose [Limit] to set using one of the standard values.
Configuration options: [Auto] [Limit]
Memclock Value [100 MHz]Memclock Value [100 MHz]
Memclock Value [100 MHz]Memclock Value [100 MHz]
Memclock Value [100 MHz]
This item appears only if the Memclock Mode item is set to [Limit].
Configuration options: [100 MHz] [133 MHz] [166 MHz] [183 MHz]
[200 MHz] [216 MHz] [233 MHz] [250 MHz]
MCT Timing Mode [Auto]
Allows you to set the MCT timing mode.
Configuration options: [Auto] [Manual]
User Config Mode [Auto]
Allows you to set the user config mode.
Configuration options: [Auto] [Manual]
Burst Length [4 Beats]
Allows you to set the burst length.
Configuration options: [8 Beats] [4 Beats] [2 Beats]
Hardware Memory Hole [Disabled]
Allows you to enable or disable remapping around the memory hole.
This feature is supported only on REV EO or later processors.
Configuration options: [Disabled] [Enabled]